Skip to content
All Products
COOLED · MWIR · LENS-INTEGRATED

Neutrino IS Series

Cooled MWIR cores factory-paired with continuous-zoom lenses. One integrated system, one warranty.

The Neutrino IS Series combines HOT MWIR camera modules with fully athermalized continuous-zoom lenses, factory-aligned to avoid opto-mechanical integration issues. Available in VGA (Neutrino LC) and SXGA (Neutrino SX8) builds, with an industry-leading two-year warranty.

Band
MWIR 3.4–5.1 µm
Resolution
640×512 or 1280×1024
Sensitivity (NEdT)
≤35 mK
Weight range
595 g – 1,980 g
Neutrino IS Series thermal camera coreUNIT · NEUTRINO-IS
Overview

Each IS configuration pairs a Neutrino HOT MWIR core with a continuous-zoom lens: optical centerline aligned to the center pixel, boresight wander eliminated through zoom, focus held across the operating temperature range by active athermalization, and autofocus capability on a single simplified interface. Long-life, low-vibration linear coolers keep the systems quiet and SWaP-optimized.

Commercially developed and military qualified, with near off-the-shelf availability. Choose VGA (LC-based) for lower cost and power, SXGA (SX8-based) for 4× the pixels and longer identification range.

Key Features

  • Camera and lens factory aligned
  • Active athermalization, autofocus capable
  • HOT FPAs with long-life linear coolers
  • Industry-leading two-year warranty
  • Factory-integrated LC and SX8 builds
  • Commercially developed, military qualified

Typical Applications

UASCounter-UASAirborne ISRGround ISRMilitary dismountTargeting
SpecificationsMWIR

Detector

Type
HOT MWIR FPA, cooled
Spectral band
3.4–5.1 µm standard
Resolution
640×512 (LC) or 1280×1024 (SX8)
Sensitivity (NEdT)
≤35 mK
Radiometry
Not available
Frame rate
Up to 60 Hz
Time-to-image
<4 min (VGA) / <5 min (SXGA), typical

Optics

Zoom
Continuous optical zoom (lens) + electronic zoom (camera)
Athermalization
Active, over full operating range
Focus
Zoom/focus controls; autofocus capable

Interfacing

Video
CMOS 16/8-bit; Camera Link via accessory board
Analog / NTSC-PAL
VGA models: yes (accessory board); SXGA: no analog
Comm & control
USB/UART (camera); RS-232 or RS-422 (lens, model-dependent)
Image optimization
Histogram equalization, DDE+

Power

Steady state w/ lens
<5 W (VGA) / <11.4 W total (SXGA) @ 23°C
Cooldown
<8 W (VGA) / <12 W (SXGA)

Environmental

Operating temp
-20°C to +70°C (limited by the lens)
Non-operating temp
-57°C to +80°C
Vibration
5.8 grms, 3-axis, 1 hr each
Humidity
5–95% non-condensing
Altitude
12 km

Compliance & Export

NDAA / ITAR
NDAA compliant · ITAR free

Representative specifications — multiple resolutions, lenses, and interface configurations are available. Request the full datasheet for your application.

Every model, side by side

VGA builds use the Neutrino LC core (640×512 @ 15 µm); SXGA builds use the Neutrino SX8 core (1280×1024 @ 8 µm). Sensitivity is ≤35 mK across the series.

LC CZ 15-300LC CZ 19-290LC CZ 27-275LC CZF 25-250LC CZF 25-375LC CZF 30-600SX8 CZ 15-300SX8 CZF 30-300
Camera core
CoreNeutrino LCNeutrino LCNeutrino LCNeutrino LCNeutrino LCNeutrino LCNeutrino SX8Neutrino SX8
Resolution640 × 512640 × 512640 × 512640 × 512640 × 512640 × 5121280 × 10241280 × 1024
Pixel pitch15 µm15 µm15 µm15 µm15 µm15 µm8 µm8 µm
Sensitivity (NEdT)≤35 mK≤35 mK≤35 mK≤35 mK≤35 mK≤35 mK≤35 mK≤35 mK
Time to image<4 min<4 min<4 min<4 min<4 min<4 min<5 min<5 min
Lens
EFL / zoom15–300 mm (20×)19.5–290 mm27–275 mm25–250 mm, folded25–375 mm30–600 mm15–300 mm (20×)30–300 mm (10×), folded
HFOV1.8°–35.5°1.9°–28.4°2.0°–20.4°2.2°–21.7°1.5°–21.9°0.9°–18.2°1.9°–38°1.9°–19.4°
F-numberf/5.5f/5.5f/5.5f/5.5f/5.5f/5.5f/4f/3
Physical
Weight1,324 g725 g595 g749 g1,140 g1,980 g1,337 g1,790 g
Size (L×W×H cm)19.25 × 9.91 × 10.5915.8 × 7.8 × 10.015.16 × 6.84 × 9.1811.4 × 6.9 × 11.715.4 × 8.5 × 12.616.9 × 13.2 × 15.019.25 × 9.91 × 9.9618.5 × 11.9 × 16.3